Showing posts with label
Sasken Interview Question Answer.
Show all posts
Showing posts with label
Sasken Interview Question Answer.
Show all posts
Ericsson Interview Question Answer, HSC Interview Question Answer, Sasken Interview Question Answer, Trumind Interview Question Answer
Joni Tyagi
1:54 PM
Q1. How a ue can search (provide) plmn list at that area where network is not available?
Q2. Is all plmn list should be visible for all the UE’s present in a network?
Q3. If physical layer provide all the plmn list in a geographical area then what NAS layer will do?
Q4. If i purchase a sim card from delhi and i switch on my device into mumbai than what will be happen?
Q5. How many PLMN id’s in a list?
Q6. When you power on your UE and physical layer search all plmn and create a list, then how our sim verify that this is my PLMN?
Q7. Your physical layer have own plmn list then why need to provide (plmn list) to higher layer?
Q8. What information UE get from PSS and apart from that?
Q9. How UE get the TS0 - - - TS19 of ofdm boundary there are 6 OFDM symbol and 7 OFDM symbol in a slot?
Q10. What is the importance of MIB?
Q11. We have 1024 SFN means 210 = 10bit SFN, but in MIB SFN is 8bit what is the reason?
Q12. In physical layer how many bits are align to MIB?
Q13. What kind of Information UE got into the RAR?
Q14. What is the purpose to Timing Advanced?
Q15. How enodeb calculate Timing Advanced?
Q16. What is Contention Resolution?
Q17. How network know that which preamble is using by which ue? How network differentite?
Q18. What are the Attach Req ie’s?
Q19. How many types of codec are there in LTE?
Q20. Codec name of VOLTE and CS Domain?
Q21. Handover happen before measurement gap or after measurement gap?
Q22. What do you understande by MAC CE?
Q23. Network send some update information to UE regarding update system information, so how ue know about update in SIB?
Q24. Suppose if i have 2 device 1st is DUT and 2nd is Reference device and my both device are far 200m from enodeb then is my DUT get only 1 mbps DL speed and Reference device get 40 mbps DL speed what is wrong in my DUT?
Q25. During handover performing what kind of Scheduling is happen? SPS or Dynamic?
L&T Interview Questions Answers, Qualcomm Interview Questions Answers, Sasken Interview Question Answer, Trumind Interview Question Answer
Joni Tyagi
1:26 PM
Q01. HOW YOU CONFIGURE UE FOR TESTING?Q02. WHAT TYPE OF BUGS YOU HAVE FIND OUT?
Q03. WHAT IS THE CONDITIONS OF RE-ESTABLISHMENT?
Q04. WHAT IS THE RRC RE-ESTABLISHMENT TIME?
Q05. IF YOU SEND A WRONG CONFIGURATION THAN HOW WILL YOU KNOW IT’S A NETWORK ISSUE OR SOMETHING?
Q06. HOW DO YOU FIND NETWORK ISSUE?
Q07. WHAT IS NETWORK FORWARDING?
Q08. DEFINE LAB SETUP?
Q09. HOW WOULD YOU REPORT BUG TO THE DEVELOPMENT TEAM?
Q10. DEFINE HANDOVER REDIRECTION?
Q11. WHY HANDOVER REQUIRED?
Q12. WHAT IS THE I-RAT EVENT?
Q13. DEFINE C.A?
Q14. WHAT IS THE RELEASE VERSION YOU CURRENTLY WORKED ON?
Q15. WHY YOU WANT TO JOIN?
Q16. WHAT IS LTE EVENTS?
Q17. WHICH SYSTEM SIMULATOR YOU ARE CURRENTLY WORKING?
Q18. WHAT YOU DO ON ANITE-9000?
Q19. WHAT IS YOUR ROLE IN YOUR COMPANY?
Q20. DO YOU HAVE ANY QUESTION FOR ME?
Q21. X2AP, S1AP HANDOVER?
Q22. HOW RESOURCE BLOCK ALLOCATE TO UE
Altron Interview Question Answer, Anritsu Interview Question Answer, Ericsson Interview Question Answer, Sasken Interview Question Answer
Joni Tyagi
9:49 PM
Q01. What is the difference between priority and severity in Test Case bug reporting?
Q02. In which conditions ue have 2 ip addresses is it possible a ue can have 2 different ip or 2 same ip?
Q03. Define lab setup?
Q04. AT command for PDCP configurations and power on UE?
Q05. Replace 2 no’s values with each without create a new variable in python?
Q06. Define Handovers in LTE?
Q07. What are Cell re-selection procedures?
Q08. Difference between SRVCC and CSFB?
Q09. What is SDP protocol?
Q10. What is a magic cookie in IMS via message?
Q11. What is Standalone and Non-Standalone network architecture in 5G?
Q12. What is DRX?
Q13. Define a bug you have found yesterday?
Q14. How to report bug and what kind of tool you are using for debugging?
Q15. UE connects 2 pdn how many it have default bearer and dedicated bearer?
Q16. How many coding schemes are present in lte and their name with functionalities?
Q17. What is orthogonal coding scheme?
Q18. If your browsing an internet then ue required a dedicated bearer or default is enough define with details it’s possible or not and why?
Q19. What are the conditions of re-establishment and re-configurations in lte?
Q20. How many cells you can configure in SS?
Q21. How you analysis the logs?
Q22. How you capture UE logs?
Q23. Define SMS call flow architecture?
Q24. What are Attach failure cause?
